OMB files this comment in accordance with 5 CFR 1320.11(c) of the Paperwork Reduction Act and is withholding approval of this collection at this time. This OMB action is not an approval to conduct or sponsor an information collection under the Paperwork Reduction Act of 1995. The agency shall examine public comment in response to the Notice of Proposed Rulemaking and will include in the supporting statement of the next ICR, to be submitted to OMB at the final rule stage, a description of how the agency has responded to any public comments on the ICR. This action has no effect on any current approvals.
Inventory as of this Action
Requested
Previously Approved
04/30/2019
04/30/2019
04/30/2019
1,749
0
1,749
190,000
0
190,000
700,000
0
700,000
The National Emission Standards for Hazardous Air Pollutants (NESHAP) for the Surface Coating of Metal Furniture (40 CFR 63, Subpart RRRR) defines a âmetal furnitureâ as âfurniture or components of furniture constructed either entirely or partially from metal. Metal furniture includes, but is not limited to, components of the following types of products as well as the products themselves: household, office, institutional, laboratory, hospital, public building, restaurant, barber and beauty shop, and dental furniture; office and store fixtures; partitions; shelving; lockers; lamps and lighting fixtures; and wastebaskets.â New facilities include those that commenced construction or reconstruction after April 24, 2002. In general, all NESHAP standards require initial notifications, performance tests (if sources are using add-on controls to demonstrate compliance), and periodic reports by the owners/operators of the affected facilities. They are also required to maintain records of the occurrence and duration of any deviation from an emission limitation (either a numerical emission limit, an operating limit, or an equipment or work practice standard), or any period during which the monitoring system is inoperative. These notifications, reports, and records are essential in determining compliance, and are required of all affected facilities subject to the NESHAP. This information is being collected to assure compliance with 40 CFR Part 63, Subpart RRRR.
As part of the RTR for the Surface Coating of Metal Furniture NESHAP, the EPA is proposing to revise startup, shutdown, and malfunction (SSM) provisions of the Maximum Achievable Control Technology (MACT) rule and proposing the use of electronic data reporting for future performance test data submittals, notifications, and reports.
The current proposed rule results in a small increase in the labor hours per respondent in this ICR as compared to the previous ICR. This situation is due to three considerations: 1) time in year one to get familiar with the rule amendment, 2) increased time in year one to re-evaluating previously developed SSM record systems, and 3) time in year one to become familiar with CEDRI and the electronic reporting form for the semiannual report.
On behalf of this Federal agency, I certify that the collection of information encompassed by this request complies with 5 CFR 1320.9 and the related provisions of 5 CFR 1320.8(b)(3).
The following is a summary of the topics, regarding the proposed collection of information, that the certification covers:
(i) Why the information is being collected;
(ii) Use of information;
(iii) Burden estimate;
(iv) Nature of response (voluntary, required for a benefit, or mandatory);
(v) Nature and extent of confidentiality; and
(vi) Need to display currently valid OMB control number;
If you are unable to certify compliance with any of these provisions, identify the item by leaving the box unchecked and explain the reason in the Supporting Statement.
1952t08.xlsx
1952ss08.docx
NESHAP for Metal Furniture Surface Coating