When this ICR is renewed, EPA should review the respondent burden, universe,
response number, labor rates, and capital costs and if necessary, update these estimates.
Inventory as of this Action
Requested
Previously Approved
06/30/2013
36 Months From Approved
06/30/2010
3,525
0
4,146
320,917
0
321,393
264,400
0
264,400
Owners or operators of plastic parts and products surface coating operations subject to 40 CFR Part 63, Subpart PPPP are required to report startup, initial performance test, and retest information. Facilities also report on a regular basis; emission exceedances, changes to equipment, and other data. Additional records and notifications depend on how the owner or operator chooses to comply with the standards. The owner or operator of a plastic parts and products surface coating operation that is subject to these final standards will be required to control hazardous air pollutants (HAP) by either limiting the HAP content of materials used in the coating operations (compliant material option), demonstrating that the source-wide HAP emissions meet the emission limit (emission rate without add-on controls option), or by using an emission capture and control system to demonstrate that the source-wide emissions meet the emission limitation (emission rate with add-on controls option).
On behalf of this Federal agency, I certify that the collection of information encompassed by this request complies with 5 CFR 1320.9 and the related provisions of 5 CFR 1320.8(b)(3).
The following is a summary of the topics, regarding the proposed collection of information, that the certification covers:
(i) Why the information is being collected;
(ii) Use of information;
(iii) Burden estimate;
(iv) Nature of response (voluntary, required for a benefit, or mandatory);
(v) Nature and extent of confidentiality; and
(vi) Need to display currently valid OMB control number;
If you are unable to certify compliance with any of these provisions, identify the item by leaving the box unchecked and explain the reason in the Supporting Statement.
2044ss04 (final draft 12-21-09).doc
NESHAP for Plastic Parts and Products Surface Coating (40 CFR part 63, subpart PPPP) (Renewal)