NESHAP for Plating and Polishing Area Sources (40 CFR part 63, subpart WWWWWW) (Renewal)
Extension without change of a currently approved collection
No
Regular
05/30/2025
Requested
Previously Approved
36 Months From Approved
05/31/2025
3,045
3,045
67,700
67,700
0
0
The National Emission Standards for Hazardous Air Pollutants (NESHAP) for Plating and Polishing Area Sources (40 CFR Part 63, Subpart WWWWWW) were proposed on March 14, 2008; promulgated on July 1, 2008; and most-recently amended on both September 19, 2011 and November 19, 2020.1 These regulations apply to both existing and new plating and polishing facilities that are an area source of hazardous air pollutant (HAP) emissions and that use one or more of the following metal HAP: cadmium, chromium, lead manganese, or nickel (hereafter referred to as the plating and polishing metal HAP). In general, all NESHAP standards require initial notifications, performance tests, and periodic reports by the owners/operators of the affected facilities. They are also required to maintain records of the occurrence and duration of any startup, shutdown, or malfunction in the operation of an affected facility, or any period during which the monitoring system is inoperative. These notifications, reports, and records are essential in determining compliance, and are required of all affected facilities subject to NESHAP. This information is being collected to assure compliance with 40 CFR Part 63, Subpart WWWWWW.
On behalf of this Federal agency, I certify that the collection of information encompassed by this request complies with 5 CFR 1320.9 and the related provisions of 5 CFR 1320.8(b)(3).
The following is a summary of the topics, regarding the proposed collection of information, that the certification covers:
(i) Why the information is being collected;
(ii) Use of information;
(iii) Burden estimate;
(iv) Nature of response (voluntary, required for a benefit, or mandatory);
(v) Nature and extent of confidentiality; and
(vi) Need to display currently valid OMB control number;
If you are unable to certify compliance with any of these provisions, identify the item by leaving the box unchecked and explain the reason in the Supporting Statement.
2294.07 Supplemental Doc- Reg Text.docx
2294t07.xlsx
NESHAP for Plating and Polishing Area Sources (Renewal)