NESHAP for Shipbuilding and Ship Repair Facilities - Surface Coating (40 CFR part 63, subpart II) (Renewal)
Extension without change of a currently approved collection
No
Regular
02/28/2025
Requested
Previously Approved
36 Months From Approved
02/28/2025
112
100
28,700
25,600
0
0
The National Emission Standards for Hazardous Air Pollutants (NESHAP) for Shipbuilding and Ship Repair Facilities - Surface Coating applies to owners or operators of shipbuilding and ship repair facilities with primer and top -coat applications in manufacturing processes and in ship repair processes. Owners or operators of shipbuilding and ship repair facilities are required to report startup, initial performance test, and retest information. Facilities will also periodically report emission exceedances, changes to equipment, and comply with other requirements of the NESHAP. This information is being collected to assure compliance with 40 CFR Part 63, Subpart II.
There is a slight increase adjustment in burden from the most recently approved ICR as currently identified in the OMB Inventory of Approved Burdens. This is due to two considerations. First, the regulations have not changed over the past three years and are not anticipated to change over the next three years. Second, the growth rate for this industry is very low or non-existent, so there is no significant change in the overall burden.
On behalf of this Federal agency, I certify that the collection of information encompassed by this request complies with 5 CFR 1320.9 and the related provisions of 5 CFR 1320.8(b)(3).
The following is a summary of the topics, regarding the proposed collection of information, that the certification covers:
(i) Why the information is being collected;
(ii) Use of information;
(iii) Burden estimate;
(iv) Nature of response (voluntary, required for a benefit, or mandatory);
(v) Nature and extent of confidentiality; and
(vi) Need to display currently valid OMB control number;
If you are unable to certify compliance with any of these provisions, identify the item by leaving the box unchecked and explain the reason in the Supporting Statement.