10 CFR 40 - "Domestic Licensing of Source Material"
Revision of a currently approved collection
No
Regular
05/31/2022
Requested
Previously Approved
36 Months From Approved
07/31/2022
1,341
1,390
16,422
16,928
562
583
The U.S. Nuclear Regulatory Commission (NRC) regulations in Part 40 of Title 10 of the Code of Federal Regulations establish procedures and criteria for the issuance of licenses to receive title to, receive, possess, use, transfer, or deliver source and byproduct material. The application, reporting, recordkeeping, and third party notification requirements are necessary to permit the NRC to make a determination as to whether the possession, use, and transfer of source and byproduct material is in conformance with the Commissionâs regulations for protection of public health and safety.
The overall burden decreased by 506 hours from 16,928 hours to 16,422 hours. The net decrease in burden results from an overall decrease in estimated NRC licensee burden (-405.6 hours) and a decrease in Agreement State licensee burden (-100.5 hours). The decrease in total burden results from a decrease in respondents both in NRC (-17 licensees) and Agreement State (-35 licensees) jurisdictions. While some burden per response estimates were increased due to the inclusion of burden for uranium in situ recovery facility site-specific license conditions, there are no respondents yet for those items with increased burden per response due to market conditions.
The NRCâs regulations for uranium recovery facilities are located in 10 CFR Part 40 and Appendix A to Part 40. These regulations were developed in the 1980s. The criteria in Appendix A are focused on conventional uranium milling, which was the main technique used to extract uranium at that time. Since the 1980s, the uranium recovery industry has shifted, and most facilities use in situ recovery methods to extract uranium. As the regulations in Appendix A are focused on conventional uranium milling, the NRC currently regulates uranium in situ recovery facilities via site-specific license conditions. The information required by site-specific license conditions relates to the protection of groundwater at in situ recovery facilities. The site-specific license conditions are focused on field testing, and subsequent reporting, that licensees perform to demonstrate that their activities are protective of groundwater. Prior to this renewal, the burden associated with these license conditions was not included in the Part 40 renewal package. In this renewal, 40 hours burden associated with license conditions has been added to the information collection, included on the burden table under reporting as âLicense conditions.â
Note that the ratio of Agreement State materials licenses to NRC materials licenses has increased from 6.5:1 to 7.3:1 since the last renewal. This ratio is based on the annual estimate provided by the Agreement States. NRC uses the ratio of the total of NRC materials licensees to the total number of Agreement State materials licensees to estimate the number of Agreement State respondents. The current ratio is 7.3 (7.3 Agreement State licensees: 1 NRC licensees), based on 2,187 total NRC licensees and 16,040 Agreement State licensees.
In addition, there was a change in the overall cost due to an increase in the hourly fee rate from $279/hr to $288/hr.
$755,424
No
No
No
No
No
No
No
Joey Rolland 301 415-4059
No
On behalf of this Federal agency, I certify that the collection of information encompassed by this request complies with 5 CFR 1320.9 and the related provisions of 5 CFR 1320.8(b)(3).
The following is a summary of the topics, regarding the proposed collection of information, that the certification covers:
(i) Why the information is being collected;
(ii) Use of information;
(iii) Burden estimate;
(iv) Nature of response (voluntary, required for a benefit, or mandatory);
(v) Nature and extent of confidentiality; and
(vi) Need to display currently valid OMB control number;
If you are unable to certify compliance with any of these provisions, identify the item by leaving the box unchecked and explain the reason in the Supporting Statement.