NESHAP for Clay Ceramics Manufacturing, Glass Manufacturing and Secondary Nonferrous Metals Processing Area Sources (40 CFR Part 63, Subparts RRRRRR, SSSSSS, and TTTTTT)
ICR 201605-2060-003 · OMB 2060-0606 · Historical Active
⚠️ Notice: This information collection may be outdated. More recent filings for OMB 2060-0606 can be found here:
NESHAP for Clay Ceramics Manufacturing, Glass Manufacturing and Secondary Nonferrous Metals Processing Area Sources (40 CFR Part 63, Subparts RRRRRR, SSSSSS, and TTTTTT)
Extension without change of a currently approved collection
The affected entities are subject to the General Provisions of the NESHAP at 40 CFR part 63, subpart A, and any changes, or additions to the Provisions specified at 40 CFR part 63, subparts RRRRRR, SSSSSS, and TTTTTT. Owners or operators of the affected facilities must submit a one-time-only report of any physical or operational changes, initial performance tests, and periodic reports and results. Owners or operators are also required to maintain records of the occurrence and duration of any startup, shutdown, or malfunction in the operation of an affected facility, or any period during which the monitoring system is inoperative.
There is an adjustment increase in respondent labor hours and costs in this ICR from the most recently approved ICR. This is not due to any program changes. The increase occurred because this ICR assumes all existing respondents will take some time each year to re-familiarize with the regulatory requirements. Additionally, there is a small decrease of $4 in the estimated O&M cost due to rounding. This ICR rounds all calculated burden and costs to three significant digits. There is no change in the methodology or assumptions used to calculate the O&M cost.
On behalf of this Federal agency, I certify that the collection of information encompassed by this request complies with 5 CFR 1320.9 and the related provisions of 5 CFR 1320.8(b)(3).
The following is a summary of the topics, regarding the proposed collection of information, that the certification covers:
(i) Why the information is being collected;
(ii) Use of information;
(iii) Burden estimate;
(iv) Nature of response (voluntary, required for a benefit, or mandatory);
(v) Nature and extent of confidentiality; and
(vi) Need to display currently valid OMB control number;
If you are unable to certify compliance with any of these provisions, identify the item by leaving the box unchecked and explain the reason in the Supporting Statement.
Copy of 2274 05 calculations table.xlsx
2274ss05.docx
Secondary Nonferrous Metals Processing Area Sources (40 CFR part 63, subpart TTTTTT)