In accordance with 5 CFR 1320, the information collection is approved for three years.
Inventory as of this Action
Requested
Previously Approved
11/30/2018
36 Months From Approved
11/30/2015
167
0
167
25,145
0
19,901
91,200
0
3,648
This ICR affects respondents from new and existing coil coating line facilities that are major sources of hazardous air pollutant (HAP). Coil coating line is the process in which special equipment is used to apply an organic coating to the surface of metal coils. All NESHAP standards require initial notifications, performance tests, and periodic reports by the owners/operators of the affected facilities. Respondents are also required to maintain records of the occurrence and duration of any startup, shutdown, or malfunction in the operation of an affected facility, or any period during which the monitoring system is inoperative. The provisions of this Subpart do not apply to coil coating lines that are part of research or laboratory equipment, or coil coating lines in which 85 percent of the metal coil coated; unless the coating line is controlled by a common control device. The required semiannual reports are used to determine periods of excess emissions, identify problems at the facility, verify operation/maintenance procedures and for compliance determinations. This information is being collected to assure compliance with 40 CFR Part 63, Subpart SSSS.
There is an increase of 5,244 hours in the total estimated respondent burden compared with the ICR currently approved by OMB. This increase is due to an adjustment of burden estimates based on industry comment received from consultation during the renewal of this ICR.
On behalf of this Federal agency, I certify that the collection of information encompassed by this request complies with 5 CFR 1320.9 and the related provisions of 5 CFR 1320.8(b)(3).
The following is a summary of the topics, regarding the proposed collection of information, that the certification covers:
(i) Why the information is being collected;
(ii) Use of information;
(iii) Burden estimate;
(iv) Nature of response (voluntary, required for a benefit, or mandatory);
(v) Nature and extent of confidentiality; and
(vi) Need to display currently valid OMB control number;
If you are unable to certify compliance with any of these provisions, identify the item by leaving the box unchecked and explain the reason in the Supporting Statement.
1957ss07.docx
NESHAP for Metal Coil Surface Coating Plants (Renewal)