Terms of the previous clearance remain in effect. OMB is withholding approval at this time. Prior to publication of the final rule, the agency should provide a summary of any comments related to the information collection and their response, including any changes made to the ICR as a result of comments. In addition, the agency must enter the correct burden estimates. This action has no effect on any current approvals.
Inventory as of this Action
Requested
Previously Approved
06/30/2013
06/30/2013
06/30/2013
1,053
0
1,053
47,189
0
47,189
18,000
0
18,000
This ICR covers information collection requirements in the proposed amendments to the Wood Furniture NESHAP (40 CFR part 63, subpart JJ).
The potential respondents are owners or operators of any existing or new affected source with wood furniture manufacturing operations. There are an estimated 406 facilities subject to the Wood Furniture Manufacturing NESHAP. The affected source is any wood furniture manufacturing facility that is engaged, either in part or in whole, in the manufacture of wood furniture or wood furniture components and that is located at a plant site that is a major source as defined in 40 CFR part 63.2, excluding sources that meet the criteria established in ?63.800(a). (b), and (c) of the Wood Furniture Manufacturing NESHAP.
The proposed amendments would prohibit the use of conventional spray guns used in wood furniture coating operations; add a new formaldehyde emission limit of 400 pound per 12-month rolling average; and revise the reporting requirements.
On behalf of this Federal agency, I certify that the collection of information encompassed by this request complies with 5 CFR 1320.9 and the related provisions of 5 CFR 1320.8(b)(3).
The following is a summary of the topics, regarding the proposed collection of information, that the certification covers:
(i) Why the information is being collected;
(ii) Use of information;
(iii) Burden estimate;
(iv) Nature of response (voluntary, required for a benefit, or mandatory);
(v) Nature and extent of confidentiality; and
(vi) Need to display currently valid OMB control number;
If you are unable to certify compliance with any of these provisions, identify the item by leaving the box unchecked and explain the reason in the Supporting Statement.
1716ss07.docx
NESHAP for Wood Furniture Manufacturing Operations (40 CFR Part 63, subpart JJ)