OMB.report

Federal forms, ICRs, and supporting documents

Information Collection Request

NESHAP for Prepared Feeds Manufacturing (40 CFR part 63, subpart DDDDDDD)

ICR 200912-2060-008 · OMB 2060-0635 · Historical Inactive

Forms and Documents
DocumentTypeStatusAvailability
No forms / supporting documents in this ICR. Check IC Document Collections.
IC Document Collections
IC IDCollectionTypeStatusForm
190089 National Emission Standards for Hazardous Air Pollutants: Area Source Standards for Prepared Feeds Manufacturing Modified
ICR Details
2060-0635 200912-2060-008
Historical Inactive 200907-2060-020
EPA/OAR 2354.02
NESHAP for Prepared Feeds Manufacturing (40 CFR part 63, subpart DDDDDDD)
New collection (Request for a new OMB Control Number)   No
Regular
Preapproved 03/01/2010
Retrieve Notice of Action (NOA) 12/23/2009
  Inventory as of this Action Requested Previously Approved
03/31/2013 36 Months From Approved
1,200 0 0
22,179 0 0
26,448 0 0
Section 112 (c)(3) of the CAA directs the Administrator to regulate area source categories accounting for 90 percent of the 30 listed urban hazardous air pollutants (HAP). Prepared feeds manufacturing was listed pursuant to the Integrated Urban Air Toxics Strategy Area Source Category List. The prepared feeds manufacturers potentially affected by the rule are facilities that produce feeds for large and small animals (except dogs and cats) and are covered under the North American Industrial Classification System (NAICS) code 311119. Regulation of this source category is necessary to ensure that area sources representing 90 percent of the emissions of chromium compounds and manganese compounds are subject to regulation. For prepared feeds facilities, the pelleting and pellet cooling operations are the primary sources of these HAP metal emissions. Section 112(d)(5) allows EPA to promulgate standards for area sources based on the maximum achievable control technology or generally available control technology or management practices (GACT). The standards for this source category are based on GACT. This final rule applies to all new and existing facilities that use chromium compounds and manganese compounds in their processes. We are subcategorizing facilities based on differences in production levels. Facilities with an average daily feed production rate exceeding 50 tons per day are "large" facilities, and those with an average daily feed production rate of 50 tons or less per day are "small" facilities. GACT consists of general management practices that apply in areas of the facilities where HAP are stored, used, or handled. For pelleting and pellet cooling operations in large facilities, GACT is the installation of cyclones. We are using particulate matter (PM) as a surrogate for chromium compounds and manganese compounds given that a correlation exists between PM and these compounds such that it is appropriate to rely on PM as a surrogate for these HAP and for their control.
US Code: 42 USC 7401 Name of Law: Clean Air Act
  
None
2060-AO98 Final or interim final rulemaking
No
1
IC Title Form No. Form Name
National Emission Standards for Hazardous Air Pollutants: Area Source Standards for Prepared Feeds Manufacturing
  Total Request Previously Approved Change Due to New Statute Change Due to Agency Discretion Change Due to Adjustment in Estimate Change Due to Potential Violation of the PRA
Annual Number of Responses 1,200 0 0 1,200 0 0
Annual Time Burden (Hours) 22,179 0 0 22,179 0 0
Annual Cost Burden (Dollars) 26,448 0 0 26,448 0 0
Yes
Changing Regulations
No
EPA is under court order to promulgate standards for area sources. This increase results from a new area source rule 40 CFR part 63, subpart DDDDDDD under section 112 of the Clean Air Act.
$87,143
No
No
Uncollected
Uncollected
No
Uncollected
Jan King 9195415665 [email protected]
  No
On behalf of this Federal agency, I certify that the collection of information encompassed by this request complies with 5 CFR 1320.9 and the related provisions of 5 CFR 1320.8(b)(3).
The following is a summary of the topics, regarding the proposed collection of information, that the certification covers:
 
 
 
 
 
 
 
    (i) Why the information is being collected;
    (ii) Use of information;
    (iii) Burden estimate;
    (iv) Nature of response (voluntary, required for a benefit, or mandatory);
    (v) Nature and extent of confidentiality; and
    (vi) Need to display currently valid OMB control number;
 
 
 
If you are unable to certify compliance with any of these provisions, identify the item by leaving the box unchecked and explain the reason in the Supporting Statement.
12/23/2009